TECHNICAL SPECIFICATIONS:
- The bristle strip material is either nylon, polypropylene, or oil tempered wire.
- Nylon and polypropylene bristles are available in 0.040, 0.028, or 0.014 bristle diameters. Wire is only available in 0.010 bristle diameter.
- Typical bristle trim length is 3" long. Other trim lengths available upon request.
- The hubs are typically a polyester powder-coated gray iron with zinc chromate plated clip assemblies. Two set screws per hub.
- The brush is helical shaped to ease onto the belt and open faced to reduce clogging or plugging.
- The unit is mounted on the conveyor by either a 1/7/16" or 1-15/16" diameter shaft and 2 pillow blocks.
- Typical brush diameter is 10". Other diameters available upon request.
- Special bristle materials available upon request.
- Special bore hubs available upon request.
- The operating temperature range is -40ºF to 180ºF (-40ºC to 82ºC) for nylon and polypropylene bristles.
ADDITIONAL RESOURCES
|
