Tripper Position Switch

Tripper Position Switch
Haga clic para agrandar
Modelo TPS

WHAT IS IT? The Model TA-TPS is a tripper position switch, which is a heavy duty limit switch commonly used to aid in positioning of the "tripper" on a conveyor with multiple discharge points or discharge chutes. The output contacts of the Model TA-TPS can control up to two separate circuits, one for machinery shutdown and one for an alarm.

WHY IS IT NECESSARY? The Model TA-TPS is relatively inexpensive protection that provides benefit by saving the time, money, and labor associated with bulk material transfer.

Modelos Disponibles
Model Description Shipping Weight
  Lbs. Price
US Funds
TA-1-TPS General Purpose, 1 SP/DT Switch 9 $
TA-2-TPS General Purpose, 2 SP/DT Switches 9 $
TA-5-TPS General Purpose, 2 DP/DT Switches 9 $
TA-1X-TPS Explosion Proof, 1 SP/DT Switch 9 $
TA-2X-TPS Explosion Proof, 2 SP/DT Switches 9 $
TA-5X-TPS Explosion Proof, 2 DP/DT Switches 9 $
TA-2D-TPS Special NEMA 4,4X & NEMA 9 Enclosure - 2 SP/DT Switches 9 $
TA-5D-TPS Special NEMA 4,4X & NEMA 9 Enclosure - 2 DP/DT Switches 9 $
Note: Tripper Position Switch or Tripper Position Control.
Epoxy coating option: add $ to price, and add "E" to end of model number.
Note: Add "M" to model number for Manual reset option and $ to price, TA-1M-TPS, TA-M2-TPS and TA-5M-TPS only. Not available for "D" or "X" models.
Typical cardboard shipping carton measures 11" x 9" x 8" each.

Note: Prices subject to change without notice.

Piezas de Repuesto
Part Description Shipping Weight
  Lbs. Price
US Funds
21033128 Replacement white acetal TPS roller assembly, complete with vertical shaft and clamp block (with hex nut). 2 $
21030324 Replacement white acetal TPS roller (only). 1 $

Note: Prices subject to change without notice.

Especificaciones Técnicas
  • The housing is cast aluminum, with optional epoxy or polyester powder coatings available. These coatings will provide protection against corrosion that is equal or greater than cast iron.
  • The roller is a heavy duty white acetal material of 3" diameter.
  • The unit is mounted on the conveyor by drilling (3) 13/32" diameter holes.
  • General purpose (weatherproof) units and explosion proof units have (1) 3/4" NPT conduit opening.
  • The units have a dry, unpowered microswitch(es) rated for 20A @ 120 VAC, 240 VAC, and 480 VAC.
  • The roller arm can move up to 90 degrees in either direction. Roller is spring loaded to automatically reset itself.
  • The operating temperature range is -40ºF (-40ºC) to 150ºF (65ºC).
  • The general purpose units are designed NEMA 4/4X weatherproof and corrosion-resistant, and NEMA 5 dust-tight. Explosionproof units are designed NEMA 7/9 for dust ignitionproof and vapor explosion proof. The dual-rated "D" units are designed NEMA 4 weatherproof and NEMA 9 dust ignition proof.
  • The general purpose controls are IP65 compliant.
  • Most models are UL and cULus listed.

Dibujos (Solamente Miembros)

Data Sheets