News

New “Traction Action” Belt Speed Detector

The Model BSD (belt speed detector) is a “traction action” motion control that indicates when a conveyor belt has slowed or quit moving altogether. The unit can be adjusted as an overspeed, underspeed, or zero speed control. The output of the Model BSD can be wired into a PLC or DCS, or to the optional …

New “Dual Rated” Conveyor Controls

Conveyor Components Company is pleased to announce the addition of “dual rated” enclosures to their established product line of quality manufactured conveyor controls. These new style enclosures are rated for a combined area classification of NEMA 4 weatherproof, NEMA 4X corrosion resistant and NEMA 9 dust ignition proof, allowing the units to be placed outdoors …

More Output Contacts Than Ever Before

Conveyor Components Company would like to announce the addition of DP/DT (double pole / double throw) microswitches to their product line of conveyor controls.  In addition to the standard 20 amp SP/DT (single pole / double throw) microswitches, the model RS and RSB pull cords, model TA belt alignment control, model FS bulk material flow control, and …

Model RSC – Compact Safety Stop Control

Conveyor Components Company is pleased to announce four new compact versions of its cable operated safety stop controls for use on indoor conveyor systems. The Model RSC product line is a smaller version of the popular Model RS and Model RSB emergency stop controls. The new models can be purchased in 4 distinct styles ranging …

Model RS-27P Pig-tail Style Cable Support

New Twist on E-Stop Cable SupportThe Model RS-27P cable support, manufactured by Conveyor Components Company, joins the ranks of the RS-23 & RS-27 and provides another way to properly support e-stop cable for our product line of quality engineered safety stop switches. The RS-27P “pig-tail” or “corkscrew” cable support allows the installer to quickly install …

READY GATE™ adjustable self-closing safety gate

OSHA and ANSI Standards require any surface above 48” (4 feet) to be guarded by guardrail systems. Any opening in the guardrail system must be protected by an offset rail or self-closing safety gate. The Model RG (Ready Gate™) is an adjustable self-closing safety gate that meets the current requirements of OSHA 1910 Subpart D …

Model RS-23 – Double-Ended Pull Cord Eyebolt

Conveyor Components Company is pleased to announce the addition of the Model RS-23 “thread-less” eyebolt as the newest accessory item for their product line of pull cords and safety stop controls. The main advantage of this double eye is that no drilling is required to install this cable support. Just place one of the two …

Model CT200H – High Temperature Tilt Probe

Conveyor Components Company is pleased to announce a new addition to their level control product line. The CT-200H is a high temperature version of their compact tilt probe, but is capable of withstanding temperatures up to 450 degrees F. The Model CT-200H was developed for use as a high level alarm in sand dryers, dehydrators, …